How to Install the BrüTank 20qt Spout Cover and Lock

Quick answer

Installing the BrüTank 20qt spout cover and lock is straightforward: snap the spout cover over the spout before transport, and attach the lock through the latch holes. Always confirm compatibility first—the lock fits 35qt and 55qt models, not the 20qt.

Step-by-step installation

1. Step 1: Confirm your model: Check the bottom or side of your BrüTank for the model number. The spout cover fits all BrüTank sizes, but the lock only fits 35qt and 55qt. If you have a 20qt, skip the lock installation. Double-check your model before purchasing or installing the lock.
2. Step 2: Clean the spout area: Wipe the spout and surrounding rim with a dry cloth to remove any dirt or moisture. This ensures the spout cover snaps on securely and creates a tight seal. A clean surface prevents debris from getting trapped under the cover.
3. Step 3: Snap on the spout cover: Align the cover over the spout and press down evenly around the edges until it clicks into place. It should sit flush and not wobble. To remove, gently pry from one edge. If it doesn't click, reposition and try again—don't force it.
4. Step 4: Attach the lock (35qt/55qt only): Open the lock and slide the shackle through the latch holes on the cooler lid. Press the shackle down until it locks. Test that it's secure by tugging gently. Make sure the lock is fully engaged before leaving the cooler unattended.

Parts you'll use

• Spout Cover Replacement: The Spout Cover Replacement keeps dirt and debris off your spout while transporting BrüMate coolers and is compatible with both the BrüTank and BackTap. This cover is a simple snap-on shield that protects the spout from dust and grime during travel, and it's already included with the BrüTank.

  

• BrüTank 35qt/55qt Lock: The BrüTank 1.5" lock is compatible with BrüTank 35qt and 55qt models, but not with the 20qt. If you own a 35qt or 55qt, this lock adds security against wildlife and helps maintain internal temperature; it won't fit the 20qt.