How to Replace the Straw in Your BrüMate Era Flip or Resa Flip: A Step-by-Step Guide

Quick Answer

To replace the straw in your BrüMate Era Flip or Resa Flip, first remove the lid and push the old straw out from the bottom. Clean the lid and straw channel, then insert the new straw through the top opening and ensure it seats securely in the bottom groove. Always check that the straw is fully seated before using the tumbler.

If you own a BrüMate Era Flip or Resa Flip tumbler, you know how convenient the flip lid is for one-handed sipping. Over time, the straw can wear out, get bent, or simply need a thorough cleaning. Replacing it is a straightforward process that takes just a few minutes and requires no special tools.

In this guide, we'll walk you through each step, from removing the old straw to installing a new one. We'll also share tips on how to care for your straw and lid to keep your tumbler performing at its best.

Understanding the Flip Lid and Straw Assembly

The BrüMate Era Flip and Resa Flip tumblers feature a flip lid that covers the straw opening when not in use. The straw itself is a flexible silicone or plastic tube that runs from the bottom of the tumbler up through the lid. The straw is held in place by a gasket or a friction fit inside the lid.

Before you start, make sure you have a replacement straw that is compatible with your specific model. The Era Flip 30oz and Resa Flip 35oz use different straw lengths, so check your tumbler's specifications or the product page for the correct size. If you're unsure, contact BrüMate customer support.

• Always check the straw length and diameter for your specific model.
• Have a clean cloth or paper towel ready to wipe up any spills.

Step-by-Step Straw Replacement

Follow these steps to replace the straw in your BrüMate Era Flip or Resa Flip. The process is the same for both models, but the straw length and lid design may differ slightly.

Take your time and be gentle to avoid damaging the lid or the new straw. If you encounter resistance, stop and check that you're pushing in the right direction.

Cleaning and Maintaining Your Straw and Lid

Regular cleaning of your straw and lid is essential to prevent mold and bacteria buildup. After each use, rinse the straw and lid with warm water. For a deeper clean, use a straw brush and mild dish soap to scrub the inside of the straw and the lid's straw channel.

You can also soak the straw and lid in a solution of warm water and white vinegar for 15-20 minutes to remove stubborn residue. Avoid using abrasive scrubbers or harsh chemicals, as they can damage the silicone or plastic.

• Clean your straw and lid at least once a week if you use your tumbler daily.
• Consider using a magnetic straw cover to keep the straw clean when you're on the go.

Step-by-Step Straw Replacement

1. Remove the Lid: Twist the lid counterclockwise to unscrew it from the tumbler. Set the tumbler aside and place the lid on a clean surface. Check that the lid is fully removed before proceeding.
2. Push Out the Old Straw: Locate the straw opening on the underside of the lid. Gently push the old straw out from the bottom using your finger or a blunt object like a chopstick. If the straw is stuck, try twisting it slightly while pulling. Do not use sharp objects that could damage the lid or straw channel.
3. Clean the Lid and Straw Channel: Rinse the lid under warm water and use a straw brush to clean the interior channel where the straw sits. This removes any residue or buildup. A clean channel ensures the new straw fits snugly and prevents leaks.
4. Insert the New Straw: Take your new straw and insert it through the top opening of the lid. Push it down until it reaches the bottom of the channel. It should fit securely without excessive force. If the straw is too long, trim it slightly, but only if you're sure it's the correct size.
5. Reassemble and Test: Screw the lid back onto the tumbler, then fill with water and test by sipping. Ensure the straw is positioned correctly and there are no leaks. If you notice any issues, repeat the steps to check the straw seating.

Product Facts

• Magnetic Straw Cover | Coral | 2-Pack: Add a bold, sparkling touch with coral shimmer straw covers. Designed for a secure fit, they keep your tumbler clean on the go. After replacing your straw, a magnetic straw cover helps keep the opening clean and prevents dust or debris from entering your drink, especially when you're out and about.
• Magnetic Straw Cover | Cascading Florals | 2-Pack: Add floral style to every sip with cascading florals straw covers. Designed for a secure fit to help keep your tumbler clean on the go. If you prefer a more decorative touch, these straw covers not only protect your straw but also add a personal style to your tumbler.

Replacing the straw in your BrüMate Era Flip or Resa Flip is a simple task that keeps your tumbler hygienic and functional. With regular cleaning and the right accessories, you can enjoy your favorite beverages for years to come.